48x40x20 NEMA 4 Aluminum Enclosure
Product Number: 014370
Customize These Parts
|Mount Style||WALL, TOWER, POLE MOUNT|
|2D Drawing||Download PDF|
- 1. Manufactured to NEMA 4 specifications/UL listed
- 2. Wall mount configuration
- 3. Full seam weld construction
- 4. Double flanged door seal opening
- 5. Full length SST concealed hinge and SST hardware
- 6. 3 point SST pad lockable latch system with nylon rollers on door rods
- 7. Door sealed with 1/2 X 2 close cell Neoprene gasket
- 8. Full size .125 alum back panel approx. 44.000 X 37.000. Swing panel must be removed to install or remove back panel from enclosure.
- 9. 1/4" THK. aluminum mounting tabs
- 10. Full size swing out dead panel approx. 44.125 X 36.750. Panel located 2" from face of enclosure.
- 11. Two Southco 1/4 compression latches on dead front panel
- 12. Two position door stop assembly
- 13. Rain drip lip over door
- 14. Grounding lugs on door and cabinet (hinge side).
- 15. Mill finish
- 16. Shipping pallet & protective wrapping